Starting a pool after winter

Starting a pool after winter is a process that requires attention to detail and a series of steps.

Choosing the right time to end the winter season plays a key role in the successful start of your pool after winter. Our experts recommend ending the winter season when the air temperature has remained stable at +20 degrees or above for several days. This will ensure that the heat outside is not a random blip, but rather a sustained phenomenon. It is also important to consider the temperature of the water in the pool, which should be above +12 degrees.

Why is it important not to open your pool in a hurry? Firstly, opening an artificial pool before the ice has completely thawed can damage the lining materials. By destroying the ice, you risk damaging the liner, which will require repair or replacement.

On the other hand, by delaying the start of the pool, you expose the reservoir to the risk of infection by harmful micro-organisms. In winter, algae spores and bacteria are frozen, but as soon as the weather warms up, they begin to multiply actively, turning the water in the pool into a dirty and dangerous environment for swimming.

The chemical balance of the water, heat and ultraviolet rays all contribute to the rapid growth of algae and bacteria. Therefore, as soon as warm and sunny days arrive, it is necessary to start the process of reopening the pool.

It is important to remember that the correct timing of each stage of pool refurbishment will help to avoid problems and ensure safe and enjoyable pool use throughout the summer season. In this article, we will look at the key steps to successfully reopening your pool after winter.

SEQUENCE OF ACTIONS WHEN STARTING THE POOL:

complete guide

⚪ 1. Remove debris. The first step in winterising your pool is to remove any debris that has accumulated over the winter. This could be leaves, twigs, dust and other debris that got into the pool during bad weather. Use a cleaning net to remove these materials from the surface of the water and the bottom of the pool.

⚪ 2. Check the technical equipment. Check the condition of your pool's technical equipment, such as the pump, filter, water treatment system and chlorine generator. You can see in our shop what equipment is used to operate the pool. Make sure all components are in good working order and free from damage. You should also check the chlorine level and pH of the water and adjust if necessary.

⚪ 3. Clean and prepare the filter. After the winter, the pool filter may be dirty and clogged. Check its condition and clean it of any dirt. Also check the filter material and replace it if necessary. Run the filtration system and check that it is working efficiently.

⚪ 4. Fill with water. Once the bowl has been cleaned and prepared, fill it with water to the required level. Ensure that the water is clean and free of contaminants. If the water requires chlorination or pH adjustment, add the necessary substances to ensure water safety.

Buying chemicals for pool maintenance

⚪ 5. Test the water. After filling your pool with water, it is important to test the water to determine chlorine levels, pH and other chemical parameters. Using special test strips or test kits, you can measure these values and adjust them to the optimum values. You can find out more about the options for pool chemicals in the relevant section of our online store.

⚪ 6. Start the water filtration and treatment system. Once the pool has been filled with water and checked for cleanliness, start the water filtration and treatment system. Check that all components are working properly and that water is passing through the cleaning and disinfection system.

⚪ 7. Regular care and maintenance. Once your pool is up and running, it is important to carry out regular care and maintenance to ensure it runs smoothly throughout the swimming season. This includes clearing the pool of leaves and other debris, regularly checking chlorine and pH levels, and maintaining a filtration and water treatment system.