This is a series of photos that shows a step-by-step process of how I made a DIY Plague Doctor Mask with my friend GretchenB-14 . There is steps without pictures but I was unable to get some because of my teacher and also because I simply got busy and forgot to photograph.
Supplies:
- Two sheets of foam -Fabric -Hot Glue and a hot glue gun - (Optional) Goggles. The ones I used are ones I got for about $15 at a fair a few years ago. I only needed the lens parts so I cut those out and then removed the elastic holding the backing together.
I first sketched out the shapes onto paper and cut those out (no pic)
Then I taped the paper together to form the mask shape and then made adjustments
Then I traced the paper cutouts onto the foam and then cut out foam shapes with an exacto knife, and then put the goggles to eye holes and then adjusted so there was room for those (sorry no pic of that)
Then roughly taped them together
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
