Although the equipment produced by aerator manufacturers has strong stability, if it is improperly operated, it will still lead to various unexpected problems. Next, Qiankun Environmental Protection will take you to take a look at the precautions in the operation of the belt dehydrator. , let's take a look. The aerator manufacturer reminds everyone that the application of the belt dehydrator requires special personnel to be responsible, and after each use and shutdown, the corresponding daily inspection and maintenance work must be carried out, the power supply should be turned off in time, and the contamination on the equipment should be cleaned up. , Check the status of the fasteners in each part of the equipment to ensure firmness and reliability, and check the wear status of each component at the same time. If serious wear problems are found, they need to be replaced in time. For equipment that has been idle for a long time, it is necessary to check and clean up foreign objects on the equipment before reusing it so as not to affect normal movement. Aerator manufacturers have found that most users will operate it in conjunction with other equipment when using the equipment. When starting, they should pay attention to maintaining no-load, stop feeding and run for a period of time before stopping. During operation, ensure that the operating pressure of the equipment is within the rated value, and do a good job of selection according to the actual working conditions, so as not to affect the later application effect. The above is the introduction of the aerator manufacturer Qiankun Environmental Protection Co., Ltd. to the precautions for the operation of the belt dehydrator